Product group: Rod seal
Design: N symmetrical u-ring
Profile no.: 05
Specification: E suitable for one-sided pressure load
Seal material: NBR 80
Seal back: NBR fabric NBR F 80
Operational application limits
Pressure (MPa): ≤ 20
Temperature (°C): -30 to +100
Running speed (m/s): ≤ 0.5
Hydraulic oils acc. to DIN 51524 Part 1 – 3, lubricating oils, mineral oil based lubricating greases, highly non-flammable hydraulic fluids HFA, HFB, HFC acc. to VDMA 24317
The u-ring N05 is produced in a compact design which guarantees good functioning at low pressures. The N05 has a symmetrical design that allows application as a piston and rod seal.
U-rings can be installed in both solid and split housings. Please note for a solid housing application a minimum width is necessary and suitable installation tools may be required.
The N05 seal requires relatively small installation housings. Due to the compact fabric back, intrusion into the extrusion gap is prevented.